A suit is a set of men's or women's clothes comprising a suit jacket, or coat, and trousers. When of identical textile, and worn with a collared dress shirt, necktie, and dress shoes, it is traditionally considered informal wear in Western dress codes. The lounge suit originated in 19th-century Britain as more casual wear alternative for sportswear and British country clothing. After replacing the black frock coat in the early 20th century as regular daywear, a sober one-coloured suit became known as a lounge suit. A darker, understated lounge suit for professional occasions became known as a business suit.
Suits are offered in different designs and constructions. Cut, and cloth, whether two- or three-piece, single- or double-breasted, vary, in addition to various accessories. A two-piece suit has a jacket and trousers, a three-piece suit adds a waistcoat (known as a vest in North America).Hats were almost always worn outdoors (and sometimes indoors) with all men's clothes until the counterculture of the 1960s in Western culture. Informal suits have been traditionally worn with a fedora, a trilby, or a flat cap. Other accessories include handkerchief, suspenders or belt, watch, and jewelry.
Other notable types of suits are for semi-formal occasions dinner suit (black tie) and the black lounge suit (stroller), both which arose as less formal alternatives for the formal wear of the dress coat for white tie, and the morning coat with formal trousers for morning dress, respectively.
Originally, suits were always tailor-made from the client's selected cloth. These are now known as bespoke suits, custom-made to measurements, taste, and style preferences. Since the 1960s, most suits are mass-produced ready-to-wear garments. Currently, suits are offered in roughly four ways:
bespoke, in which the garment is custom-made by a tailor from a pattern created entirely from the customer's measurements, giving the best fit and free choice of fabric;
made to measure, in which a pre-made pattern is modified to fit the customer, and a limited selection of options and fabrics is available;
ready-to-wear, off-the-peg (Commonwealth English), or off-the-rack (American English), which is sold as is, although some tailor alteration tends to be required;
suit separates where lounge jacket and trousers are sold separately in order to minimize alterations needed, including also odd-coloured blazers or sports coats as smart casual options
Terminology
The word suit derives from the French suite,meaning "following", from some Late Latin derivative form of the Latin verb sequor = "I follow", because the component garments (jacket and trousers and waistcoat) follow each other and have the same cloth and colour and are worn together.
As a suit (in this sense) covers all or most of the wearer's body, the term "suit" was extended to a single garment that covers all or most of the body, such as boilersuits, diving suits, and spacesuits (see Suit (disambiguation)).
History
The current styles, founded in the industrial revolution during the late 18th century, sharply changed the elaborately embroidered and jewelled formal clothing into the simpler clothing of the British Regency period, which gradually evolved to the stark formality of the Victorian era. In the late 19th century, it was in the search for more comfort that the loosening of rules gave rise to the modern lounge suit.
Brooks Brothers is generally credited with first offering the "ready-to-wear" suit, a suit which was sold already manufactured and sized, ready to be tailored. It was Haggar Clothing that first introduced the concept of suit separates in the US, the concept of separately sold jackets and trousers, which are widely found in the marketplace today.
Composition
There are many possible variations in the choice of the style, the garments, and the details of a suit.
Cut
Good tailoring anywhere in the world is characterised by strongly tapered sides and minimal shoulder, whereas rack suits are often padded to reduce labour. More casual suits are characterised by less construction and tailoring, much like the sack suit, a loose American style.[5]The silhouette of a suit is its outline. Tailored balance created from a canvas fitting allows a balanced silhouette so a jacket need not be buttoned and a garment is not too tight or too loose. A proper garment is shaped from the neck to the chest and shoulders to drape without wrinkles from tension. Shape is the essential part of tailoring that often takes hand work from the start. The two main cuts are double-breasted suits, a conservative design with two columns of buttons, spanned by a large overlap of the left and right sides; and single-breasted suits, in which the sides overlap very slightly, with a single column of buttons.
There are three ways to make suits:
Ready made and altered "sizes" or precut shapes; a convenience that often is expressed over time with wrinkles from poor shaping, leading to distortion;
The made-to-measure suit that uses measurements, not shaping, to achieve things like style, lengths and horizontal measurements;
The custom, bespoke or tailoring-designed suit that has interim half-made fittings and is cut from an actual personal pattern.
The acid test of authentic tailoring standards is the wrinkle that comes from poor tailoring. Rumples can be pressed out. For interim fittings, "Rock Of Eye" (which means trained freehand based on an experienced artistic eye to match the item to the wearer, trusting the eye over unyielding scripted approach), drawing and cutting inaccuracies are overcome by the fitting.
Fabric
Suits are made in a variety of fabrics, but most commonly from wool. The two main yarns produce worsteds (where the fibres are combed before spinningto produce a smooth, hard wearing cloth) and woollens (where they are not combed, thus remaining comparatively fluffy in texture). These can be woven in a number of ways producing flannel, tweed, gabardine, and fresco among others. These fabrics all have different weights and feels, and some fabrics have an S (or Super S) number describing the fineness of the fibres measured by average fibre diameter, e.g., Super 120; however, the finer the fabric, the more delicate and thus less likely to be long-wearing it will be. Although wool has traditionally been associated with warm, bulky clothing meant for warding off cold weather, advances in making finer and finer fibre have made wool suits acceptable for warmer weather, as fabrics have accordingly become lighter and more supple. Wool fabric is denominated by the weight of a one-square yard piece; thus, the heavier wools, suitable for winter only, are 12–14 oz.; the medium, "three season" (i.e., excluding summer) are 10–11 oz.; and summer wools are 7–8 oz. (In the days before central heating, heavier wools such as 16 oz. were used in suits; now they are used mainly in overcoats and topcoats.) Other materials are used sometimes, either alone or blended with wool, such as cashmere.Silk alone or blended with wool is sometimes used. Synthetic materials, while cheaper, e.g., polyester, are very rarely recommended by experts. At most, a blend of predominantly wool may be acceptable to obtain the main benefit of synthetics, namely resistance to wrinkling, particularly in garments used for travel; however, any synthetic, blended or otherwise, will always be warmer and clammier than wool alone.For hot weather, linen is also used, and in the US South, cotton seersucker is worn.
The main four colours for suits worn in business are black, light grey, dark grey, and navy, either with or without patterns. In particular, grey flannel suiting has been worn very widely since the 1930s. In non-business settings or less-formal business contexts, brown is another important colour; olive also occurs. In summer, lighter shades such as tan or cream are popular.
For non-business use tweed has been popular since Victorian times, and still is commonly worn. A wide range of colour is available, including muted shades of green, brown, red, and grey.Tweeds are usually checked, or plain with a herringbone weave, and are most associated with the country. While full tweed suits are not worn by many now, the jackets are often worn as sports jackets with odd trousers (trousers of different cloth).
The most conventional suit is a two- or three-button and either medium to dark grey or navy. Other conservative colours are greys, black, and olive. White and light blues are acceptable at some events, especially in the warm season. Red and the brighter greens are usually considered "unconventional" and "garish". Tradition calls for a gentleman's suit to be of decidedly plain colour, with splashes of bright colour reserved for shirts, neckties or kerchiefs.
In the United States and the United Kingdom, around the start of the 20th century, lounge suits were never traditionally worn in plain black, this colour instead being reserved for formal wear(including dinner jackets or strollers), and for undertakers. However, the decline of formal wear since the 1950s and the rise of casual wear in 1960s allowed the black suit to return to fashion, as many designers began wanting to move away from the business suit toward more fashion suits.
Traditional business suits are generally in solid colours or with pin stripes;windowpane checks are also acceptable. Outside business, the range of acceptable patterns widens, with plaids such as the traditional glen plaid and herringbone, though apart from some very traditional environments such as London banking, these are worn for business now too. The colour of the patterned element (stripes, plaids, and checks) varies by gender and location. For example, bold checks, particularly with tweeds, have fallen out of use in the US, while they continue to be worn as traditional in Britain. Some unusual old patterns such as diamonds are now rare everywhere.
Inside the jacket of a suit, between the outer fabric and the inner lining, there is a layer of sturdy interfacing fabric to prevent the wool from stretching out of shape; this layer of cloth is called the canvas after the fabric from which it was traditionally made. Expensive jackets have a floating canvas, while cheaply manufactured models have a fused (glued) canvas.A fused canvas is less soft and, if poorly done, damages the suppleness and durability of the jacket,so many tailors are quick to deride fused canvas as being less durable, particularly since they may tend to permanently pucker along the jacket's edges after some use or a few dry cleanings.However, some selling this type of jacket claim that the difference in quality is very small.A few London tailors state that all bespoke suits should use a floating canvas.
Jacket
Front buttons
Most single-breasted suits have two or three buttons, and four or more buttons are unusual. Dinner jackets ("black tie") usually have only one button. It is rare to find a suit with more than four buttons, although zoot suits can have as many as six or more due to their longer length. There is also variation in the placement and style of buttons,since the button placement is critical to the overall impression of height conveyed by the jacket. The centre or top button will typically line up quite closely with the natural waistline.There seems to be no clear rule as to on which side the overlap should lie. It usually crosses naturally with the left side to the fore but not invariably. Generally, a hidden button holds the underlap in place.
Double-breasted jackets have only half their outer buttons functional, as the second row is for display only, forcing them to come in pairs. Some rare jackets can have as few as two buttons, and during various periods, for instance the 1960s and 70s, as many as eight were seen. Six buttons are typical, with two to button; the last pair floats above the overlap. The three buttons down each side may in this case be in a straight line (the 'keystone' layout) or more commonly, the top pair is half as far apart again as each pair in the bottom square. A four-button double-breasted jacket usually buttons in a square.The layout of the buttons and the shape of the lapel are co-ordinated in order to direct the eyes of an observer. For example, if the buttons are too low, or the lapel roll too pronounced, the eyes are drawn down from the face, and the waist appears larger.
Lapels
The jacket's lapels can be notched (also called "stepped"), peaked ("pointed"), shawl, or "trick" (Mandarin and other unconventional styles). Each lapel style carries different connotations, and is worn with different cuts of suit. Notched lapels, the most common of the three, are usually only found on single-breasted jackets and are the most informal style. They are distinguished by a 75 to 90 degree 'notch' at the point where the lapel meets the collar.Peaked lapels have sharp edges which point upward towards the shoulders. Double-breasted jackets usually have peaked lapels, although peaked lapels are often found on single breasted jackets as well. Shawl lapels are a style derived from the Victorian informal evening wear, and as such are not normally seen on suit jackets except for tuxedos or dinner suits.For black tie events, only jackets with pointed and shawl lapels should be worn.
In the 1980s, double-breasted suits with notched lapels were popular with power suits and the New Wave style.
In the late 1920s and 1930s, a design considered very stylish was the single-breasted peaked lapel jacket. This has gone in and out of vogue periodically, being popular once again during the 1970s,and is still a recognised alternative. The ability to properly cut peak lapels on a single-breasted suit is one of the most challenging tailoring tasks, even for very experienced tailors.
The width of the lapel is a varying aspect of suits, and has changed over the years. The 1930s and 1970s featured exceptionally wide lapels, whereas during the late 1950s and most of the 1960s suits with very narrow lapels—often only about an inch wide—were in fashion. The 1980s saw mid-size lapels with a low gorge (the point on the jacket that forms the "notch" or "peak" between the collar and front lapel). Current (mid-2000s) trends are towards a narrower lapel and higher gorge.Necktie width usually follows the width of the jacket lapel.
Lapels also have a buttonhole, intended to hold a boutonnière, a decorative flower. These are now only commonly seen at more formal events. Usually double-breasted suits have one hole on each lapel (with a flower just on the left), while single-breasted suits have just one on the left.
Pockets
Most jackets have a variety of inner pockets, and two main outer pockets, which are generally either patch pockets, flap pockets, or jetted ("besom") pockets.The patch pocket is, with its single extra piece of cloth sewn directly onto the front of the jacket, a sporting option, sometimes seen on summer linen suits, or other informal styles. The flap pocket is standard for side pockets, and has an extra lined flap of matching fabric covering the top of the pocket. A jetted pocket is most formal, with a small strip of fabric taping the top and bottom of the slit for the pocket. This style is most often on seen on formalwear, such as a dinner jacket.
A breast pocket is usually found at the left side, where a pocket square or handkerchief can be displayed.
In addition to the standard two outer pockets and breast pocket, some suits have a fourth, the ticket pocket, usually located just above the right pocket and roughly half as wide. While this was originally exclusively a feature of country suits, used for conveniently storing a train ticket, it is now seen on some town suits. Another country feature also worn sometimes in cities is a pair of hacking pockets, which are similar to normal ones, but slanted; this was originally designed to make the pockets easier to open on horseback while hacking.
Sleeves
Suit jackets in all styles typically have three or four buttons on each cuff, which are often purely decorative (the sleeve is usually sewn closed and cannot be unbuttoned to open). Five buttons are unusual and are a modern fashion innovation. The number of buttons is primarily a function of the formality of the suit; a very casual summer sports jacket might traditionally (1930s) have had only one button, while tweed suits typically have three and city suits four. In the 1970s, two buttons were seen on some city suits.Today, four buttons are common on most business suits and even casual suits.
Although the sleeve buttons usually cannot be undone, the stitching is such that it appears they could. Functional cuff buttons may be found on high-end or bespoke suits; this feature is called a surgeon's cuff and "working button holes" (U.S.).Some wearers leave these buttons undone to reveal that they can afford a bespoke suit, although it is proper to leave these buttons done up.Modern bespoke styles and high end off-the-rack suits equipped with surgeon's cuffs have the last two buttons stitched off-centre, so that the sleeve hangs more cleanly should the buttons ever be undone. Certainty in fitting sleeve length must be achieved, as once working button holes are cut, the sleeve length essentially cannot be altered further.
A cuffed sleeve has an extra length of fabric folded back over the arm, or just some piping or stitching above the buttons to allude to the edge of a cuff. This was popular in the Edwardian era, as a feature of formalwear such as frock coats carried over to informalwear, but is now rare.
Vents
A vent is a slit in the bottom rear (the "tail") of the jacket. Originally, vents were a sporting option, designed to make riding easier, so are traditional on hacking jackets, formal coats such as a morning coat, and, for practicality, overcoats. Today there are three styles of venting: the single-vented style (with one vent at the centre); the ventless style; and the double-vented style (one vent on each side). Vents are convenient, particularly when using a pocket or sitting down, to improve the hang of the jacket,so are now used on most jackets. Ventless jackets are associated with Italian tailoring, while the double-vented style is typically British.Dinner jackets traditionally have no vents.
Waistcoats
Waistcoats (called vests in American English) were almost always worn with suits prior to the 1940s. Due to rationing during World War II, their prevalence declined, but their popularity has gone in and out of fashion from the 1970s onwards. A pocket watch on a chain, one end of which is inserted through a middle buttonhole, is often worn with a waistcoat; otherwise, since World War I when they came to prominence of military necessity, men have worn wristwatches, which may be worn with any suit except the full evening dress (white tie). Although many examples of waistcoats worn with a double-breasted jacket can be found from the 1920s to the 1940s, that would be unusual today (one point of a double-breasted jacket being, it may be supposed, to eliminate the waistcoat). Traditionally, the bottom button of a waistcoat is left undone; like the vents in the rear of a jacket, this helps the body bend when sitting. Some waistcoats can have lapels, others do not.
Trousers
Suit trousers are always made of the same material as the jacket. Even from the 1910s to 1920s, before the invention of sports jackets specifically to be worn with odd trousers, wearing a suit jacket with odd trousers was seen as an alternative to a full suit.However, with the modern advent of sports jackets, suit jackets are always worn with matching trousers, and the trousers have always been worn with the appropriate jacket.
Trouser width has varied considerably throughout the decades. In the 1920s, trousers were straight-legged and wide-legged, with a standard width at the cuff of 23 inches. After 1935, trousers began to be tapered in at the bottom half of the leg. Trousers remained wide at the top of the leg throughout the 1940s. By the 1950s and 1960s, a more slim look had become popular. In the 1970s, suit makers offered a variety of styles of trousers, including flared, bell bottomed, wide-legged, and more traditional tapered trousers. In the 1980s these styles disappeared in favour of tapered, slim-legged trousers.
One variation in the design of trousers is the use or not of pleats. The most classic style of trouser is to have two pleats, usually forward, since this gives more comfort sitting and better hang standing.This is still a common style, and for these reasons of utility has been worn throughout the 20th century. The style originally descended from the exaggeratedly widened Oxford bags worn in the 1930s in Oxford, which, though themselves short-lived, began a trend for fuller fronts. The style is still seen as the smartest, featuring on dress trousers with black and white tie. However, at various periods throughout the last century, flat fronted trousers with no pleats have been worn, and the swing in fashions has been marked enough that the more fashion-oriented ready-to-wear brands have not produced both types continuously.
Turn-ups on the bottom of trousers, or cuffs, were initially popularised in the 1890s by Edward VII,and were popular with suits throughout the 1920s and 1930s. They have always been an informal option, being inappropriate on all formalwear.
Other variations in trouser style include the rise of the trouser. This was very high in the early half of the 20th century, particularly with formalwear, with rises above the natural waist,to allow the waistcoat covering the waistband to come down just below the narrowest point of the chest. Though serving less purpose, this high height was duplicated in the daywear of the period. Since then, fashions have changed, and have rarely been that high again with styles returning more to low-rise trousers, even dropping down to have waistbands resting on the hips. Other changing aspects of the cut include the length, which determines the break, the bunching of fabric just above the shoe when the front seam is marginally longer than height to the shoe's top. Some parts of the world, such as Europe, traditionally opt for shorter trousers with little or no break, while Americans often choose to wear a slight break.
A final major distinction is made in whether the trousers take a belt or braces (suspenders). While a belt was originally never worn with a suit, the forced wearing of belts during wartime years (caused by restrictions on use of elastic caused by wartime shortages) contributed to their rise in popularity, with braces now much less popular than belts. When braces were common, the buttons for attaching them were placed on the outside of the waistband, because they would be covered by a waistcoat or cardigan, but now it is more frequent to button on the inside of the trouser. Trousers taking braces are rather different in cut at the waist, employing inches of extra girth and also height at the back. The split in the waistband at the back is in the fishtail shape. Those who prefer braces assert that, because they hang from the shoulders, they always make the trousers fit and hang exactly as they should, while a belt may allow the trouser waist to slip down on the hips or below a protruding midsection, and requires constant repositioning; also, they allow, indeed work best with, a slightly looser waist which gives room for natural expansion when seated.
Suit trousers, also known as dress pants in the US, are a style of trousers intended as formal or semi-formal wear. They are often made of either wool or polyester(although many other synthetic and natural textiles are used) and may be designed to be worn with a matching suit jacket. Suit trousers often have a crease in the front of each pant leg, and may have one or more pleats. Suit trousers can be worn at many formal and semi-formal occasions combined with a shirt that has no tie and a more relaxed fashion, which can be considered smart casual dress.
Breeches
As an alternative to trousers, breeches (or knickers in variations of English where this does not refer to underwear) may be worn with informal suits, such as tweed. These are shorter, descending to just below the knees, fastened closely at the top of the calf by a tab or button cuff. While once common, they are now typically only worn when engaged in traditional outdoor sports, such as shooting or golf. The length and design is closely related to the plus-fours (and plus-sixes etc.) worn for sport, but differ in having no bagginess. They are usually designed to be worn with long socks meeting just below the knee, but riding breeches, worn with long boots such as top boots, are long enough to meet the boot and display no sock.
